Motors
Flat Design Motor for DIY Projects
Compact, efficient, high-speed, versatile, DIY motor.
Key Features
- Compact size for easy integration into projects
- High speed and efficiency for reliable performance
- Variable operating voltage from DC 1.5 V to DC 3.0 V
- Optimized for small-scale DIY and student projects
- Works with one or two batteries for flexible power options
DC_MOTORS CATALOGUE
Product Specifications
Motor Size | 15 * 20 * 25 MM |
Shaft Length (Overall) | 38 MM |
Exposed Shaft | 7.5 MM up to 8 MM |
Shaft Diameter | 2.0 MM |
Operating Voltage | DC 1.5 V to DC 3.0 V |
No Load Speed | Up to 9400 rpm |
Motor Performance Comparison
Parameter | 1.5 Volt DC | 3.0 Volt DC |
---|---|---|
No Load Speed (rpm) | 5100 | 9400 |
No Load Current (mA) | 200 | 230 |
Max Efficiency Speed (rpm) | 4990 | 9200 |
Max Efficiency Current (mA) | 660 | 950 |
Max Efficiency Torque (g.cm) | 6 | 8.6 |
Max Efficiency Output (Watt) | 0.43 | 1.16 |
Stall Torque (g.cm) | 26 | 44 |
Stall Current (Amps) | 2.2 | 3.92 |
Similar Products
- High-speed compact DIY motor
- Efficient low-voltage project motor
- Small form-factor scientific motor
- Lightweight versatile motor
- Precision toy car motor
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for DIY enthusiasts, science students, hobbyists, and educational institutions looking for a reliable and efficient motor for various projects.
Bicycle Electric Generator
This Bicycle Electric Generator, also known as a Bicycle Dynamo, is a small but powerful device that can be attached to any turning tire, including a bike, to produce electricity. The amount of electricity generated depends on the speed of turning, and it is rated at 6 volts and 3 watts. This generator is perfect for those who want to reduce their carbon footprint while enjoying a leisurely bike ride.
Product Specifications:
Product Name | Bicycle Electric Generator (Bicycle Dynamo, 6 Volts, 3 Watts) |
Type | Electric |
Application | Bicycle, Generator, Dynamo |
Power Output | 3 Watts |
Voltage Output | 6 Volts |
Perfect for:
- Bicycle enthusiasts who want to power their devices while on the go
- Cyclists who want to reduce their carbon footprint by generating their own electricity
- Outdoor adventurers who need a reliable source of power in remote locations
- Environmentalists who want to promote sustainable energy practices
Bicycle Electric Generator
The Bicycle Electric Generator is a standard size electric generator mountable to the back wheel or front wheel of bicycles. With 12 volts and 6 watts of power, it includes all necessary parts for mounting. Not only can it be used to power bicycle lights, but it can also generate electricity in high speed home-made water mills or windmills. This versatile dynamo is perfect for outdoor enthusiasts and DIY enthusiasts alike.
Product Specifications:
Product Name | Bicycle Electric Generator |
Type | Dynamo |
Voltage | 12 Volts |
Power Output | 6 Watts Electric |
Intended Use | Bicycle |
Mount Type | Generator, Dynamo, Watts Bicycle |
Additional Features | Can be used to generate electricity in high speed home-made water mills or windmills |
Similar Products
- Bicycle Dynamo, 12 Volts, 6 Watts
- Bicycle Power Generator, 12 Volts, 8 Watts
- Bicycle Hub Dynamo, 6 Volts, 3 Watts
- Bicycle Wheel Generator, 12 Volts, 10 Watts
- Bicycle Pedal Generator, 12 Volts, 5 Watts
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This bicycle electric generator should only be installed and used by individuals with proper knowledge and experience in electrical systems. Improper installation or use can result in electric shock or other hazards. Always follow the manufacturer's instructions and use caution when operating.
Planetary Gearbox Motor
The Planetary Gearbox Motor is a high torque motor that can operate with any voltage from 3 V up to 18 V, providing a speed range of 120 to 170 RPM. The motor speed is proportional to the operating voltage, with each additional volt increasing the speed by 50 RPM. The motor's exposed shaft is 4 mm in diameter and 10 mm long. The speed reduction mechanism in this motor is a planetary gearbox. The motor measures 66.5 mm in overall length, with a maximum diameter of 24 mm, and comes with 20 cm long connection wires. This motor is used and comes with a 90-day warranty. Additionally, the motor contains strong magnets and can operate as an electric generator.
Voltage | RPM |
3 | 120 |
6 | 272 |
9 | 400 |
12 | 542 |
15 | 675 |
18 | 765 |
Key Features
- High torque motor
- Speed range of 120 to 170 RPM
- Speed proportional to operating voltage
- Planetary gearbox speed reduction mechanism
- Exposed shaft of 4 mm diameter and 10 mm length
- Overall length of 66.5 mm, with a maximum diameter of 24 mm
- 20 cm long connection wires
- Can operate as an electric generator
- Used with a 90-day warranty
DC_MOTORS CATALOGUEProduct Specifications:
Overall Length | 66.5 mm |
Diameter | 24 mm max |
Connection Wires | 20 cm long |
Rated Voltage | 5V - 18V |
Operating Voltage | 3V - 18V |
Condition | Used |
Warranty | 90 days |
Similar Products
- High Torque DC Motor
- Planetary Gearbox Motor
- Micro Planetary Gearbox Motor
- Electric Motor with Gearbox
- DC Motor with Planetary Gearbox
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for robotics enthusiasts and hobbyists.
Caution: This motor contains strong magnets and should be kept away from electronic devices and magnetic storage media.
Epicyclic Gearing or Planetary Gearing Motor, Voltage Range from 3V to 18V, with Speed Reduction Mechanism
The Epicyclic Gearing or Planetary Gearing Motor is a versatile motor that can operate with any voltage from 3V up to 18V, with the speed depending on the operating voltage. The speed reduction mechanism in this motor is Epicyclic gearing or planetary gearing. It has an exposed shaft that measures 4 mm in diameter and 12 mm long. The overall length of the motor is 64 mm, and its maximum diameter is 25 mm. The motor comes with connection wires that are 15 cm long. It is a used motor that comes with a 90-day warranty. Other features include a steel body, center shaft, and strong magnets that allow it to operate as an electric generator.
Voltage | RPM |
3 | 83 |
6 | 225 |
9 | 350 |
12 | 470 |
15 | 600 |
18 | 688 |
Key Features
- Versatile Epicyclic Gearing or Planetary Gearing Motor
- Speed Reduction Mechanism
- Exposed Shaft of 4 mm in Diameter and 12 mm Long
- Voltage Range from 3V to 18V
- Overall Length of 64 mm and Maximum Diameter of 25 mm
- Connection Wires of 15 cm Long
- Used Motor with 90-day Warranty
- Steel Body, Center Shaft, and Strong Magnets that Allow it to Operate as an Electric Generator
DC_MOTORS CATALOGUEProduct Specifications:
Voltage Range: | 3V - 18V |
Condition: | Used |
Warranty: | 90 days |
Exposed Shaft Diameter: | 4 mm |
Exposed Shaft Length: | 12 mm |
Overall Length: | 64 mm |
Maximum Diameter: | 25 mm |
Connection Wire Length: | 15 cm |
Similar Products
- Planetary Gearing Motor with 12V and 100 RPM
- Planetary Gearing Motor with 24V and 120 RPM
- Planetary Gearing Motor with 6V and 60 RPM
- Planetary Gearing Motor with 18V and 180 RPM
- Planetary Gearing Motor with 3V and 43 RPM
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for: hobbyists, makers, and anyone who needs a versatile motor with a speed reduction mechanism. Its ability to operate with a wide range of voltages makes it a great choice for many different projects. The strong magnets and the ability to operate as an electric generator add to its versatility, making it a valuable tool for experimentation and innovation.
DC Motor Plastic Mount 20mm Diameter
The DC Motor Plastic Mount 20mm Diameter offers a secure, durable, and lightweight mounting solution for DC motors, ideal for various applications including DIY projects and professional setups.
Key Features
- 20mm diameter compatibility
- Lightweight plastic construction
- Convenient bracket holder for multi-motor mounting
- 5.4mm fixing hole compatible with M4 screws
- Suitable for 130, 140, and 180 motor series
Product Specifications
Material: | Plastic |
Motor Type: | DC |
Diameter: | 20mm/0.79inch |
Overall Size: | 25x26.7x11mm/0.98x1.05x0.43inch(L*W*T) |
Fixing Hole Size: | 5.4mm |
Screw Size: | M4 (not included) |
Similar Products
- Plastic Mount for 25mm Motors
- Universal 18mm Motor Bracket
- 22mm Motor Holder, Lightweight
- Compact 15mm Motor Mount
- 30mm Motor Plastic Bracket
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Not suitable for metal motors. Ensure compatibility with motor series. Screws not included.
Perfect for DIY hobbyists, electronics students, and professional motor applications
DC Motor 12V 5600 RPM
This DC motor is perfect for any project that requires medium speed, low current, and medium torque. It is rated for 12 volts DC, but can safely operate with as little as 3.0V up to 12V. With a maximum speed of 5600 RPM, this motor is sure to provide the power you need to get the job done. See the details for more specifications.
Product Name | Dc Motor |
Voltage | 12 V |
Speed | 5600 Rpm |
Current | Low |
Torque | Medium |
Operating Voltage | 3.0V up to 12V |
Similar Products
- DC Motor, 12V, 5000 RPM High Torque
- DC Motor, 12V, 6000 RPM Low Noise
- DC Motor, 12V, 5500 RPM High Efficiency
- DC Motor, 12V, 5700 RPM Long Life
- DC Motor, 12V, 5400 RPM High Power
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Use only within the recommended voltage range of 3.0V to 12V to avoid damage to the motor.
Perfect for:
- DIY enthusiasts and hobbyists who want to create their own projects that require a reliable and efficient DC motor
- Engineering students who need a high-quality DC motor for their experiments and projects
- Small business owners who require a cost-effective and durable DC motor for their products
- Electronics technicians who need a versatile and easy-to-use DC motor for their repairs and installations
- Robotics enthusiasts who want to build their own robots and need a powerful and efficient DC motor
- Industrial manufacturers who require a dependable and long-lasting DC motor for their production processes
Dc Motor, 6V, 14000Rpm
This high speed, high power, high torque Dc Motor is rated for 6 volts Dc, but it operates safely with 4.5V up to 9V. It is perfect for a wide range of applications that require a reliable and efficient motor. With a maximum speed of 14000Rpm, this motor can handle even the most demanding tasks. Please see details for more specifications.
Key Features:
- 6V DC motor
- 14000RPM high speed
- High power
- High torque
- Safe operation with 4.5V up to 9V
- See details for more specifications
Product Specifications:
Product Name | Dc Motor |
Operating Voltage | 4.5V - 9V |
Rated Voltage | 6V |
Speed | 14000Rpm |
Power | High |
Torque | High |
Similar Products
- Dc Motor, 6V, 10000Rpm High Speed, High Power, High Torque Dc Motor
- Dc Motor, 9V, 14000Rpm High Speed, High Power, High Torque Dc Motor
- Dc Motor, 12V, 16000Rpm High Speed, High Power, High Torque Dc Motor
- Dc Motor, 6V, 12000Rpm High Speed, High Power, High Torque Dc Motor
- Dc Motor, 4.5V, 8000Rpm High Speed, High Power, High Torque Dc Motor
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This DC motor is rated for 6 volts DC, but can operate safely with 4.5V up to 9V. Please handle with care and follow all safety precautions when using.
Perfect for:
- DIY enthusiasts
- Robotics hobbyists
- Engineering students
- Electronics professionals
- Science fair projects
- STEM educators
Dc Motor, 8 V, 2400 Rpm
This Dc Motor is designed for low speed and low current applications, while still providing medium torque. It is rated for 8 volts Dc, but can safely operate with a voltage range of 4.0V up to 12V. With its specific specifications, this motor is perfect for a variety of projects and applications.
Product Specifications:
Product Name | Dc Motor |
Voltage | 8 V |
Speed | 2400 Rpm |
Current | Low |
Torque | Medium |
Safe Operating Voltage Range | 4.0V - 12V |
Similar Products
- DC Motor, 12V, 2000 RPM High Torque
- DC Motor, 6V, 1500 RPM Low Noise
- DC Motor, 10V, 1800 RPM High Efficiency
- DC Motor, 9V, 2200 RPM Low Heat
- DC Motor, 7V, 1900 RPM Long Life
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This DC motor is rated for 8 volts DC, but can operate safely with 4.0V up to 12V. Please use caution when operating outside of the recommended voltage range.
Perfect for:
- Engineering students
- DIY enthusiasts
- Robotics hobbyists
- Electronics technicians
- Industrial automation professionals
- Manufacturing engineers
Planetary Gearbox Motor
The Planetary Gearbox Motor is a high torque motor that can operate with any voltage from 3 V up to 18 V, providing a speed range of 120 to 280 RPM. The motor's speed is proportional to the operating voltage, with each additional volt increasing the speed by 40 RPM. The motor's exposed shaft is 4 mm in diameter and 10 mm long. The speed reduction mechanism in this motor is a planetary gearbox. The motor is 66.5 mm long, with a maximum diameter of 24 mm, and comes with connection wires that are 20 cm long. This motor is used and comes with a 90-day warranty. Additionally, the motor contains strong magnets and can operate as an electric generator.
Voltage | RPM |
3 | 120 |
6 | 240 |
9 | 360 |
12 | 480 |
15 | 600 |
18 | 720 |
Key Features
- High torque motor
- Speed range of 120 to 280 RPM
- Proportional speed to operating voltage
- Planetary gearbox speed reduction mechanism
- Exposed shaft of 4 mm in diameter and 10 mm long
- 66.5 mm long, with a maximum diameter of 24 mm
- Connection wires that are 20 cm long
- Can operate as an electric generator
- Used with a 90-day warranty
DC_MOTORS CATALOGUE
Product Specifications:
Overall length | 66.5 mm |
Diameter | 24 mm max |
Connection wires | 20 cm long |
Rated voltage | 5V - 18V |
Operating voltage | 3V - 18V |
Condition | Used |
Warranty | 90 days |
Similar Products
- High Torque DC Motor
- Planetary Gear Motor
- Micro Planetary Gearbox Motor
- Electric Motor with Gearbox
- DC Motor with Planetary Gearbox
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for hobbyists and robotics enthusiasts.
Caution: This motor contains strong magnets and should be kept away from electronic devices and magnetic storage media.
Planetary Gear Motor, 5V-18V Operating Voltage, with Speed Reduction Mechanism
The Planetary Gear Motor is a versatile motor that can operate with any voltage from 3V up to 18V, with the speed depending on the operating voltage. The speed reduction mechanism in this motor is a planetary gear box. It has an exposed shaft that is 4 mm in diameter and 10 mm long. The motor's overall length is 66.5 mm, and its maximum diameter is 24 mm. The motor comes with connection wires that are 20 cm long. It is a used motor that comes with a 90-day warranty. Other features include strong magnets and the ability to operate as an electric generator.
Voltage | RPM |
3 | 120 |
6 | 240 |
9 | 360 |
12 | 480 |
15 | 600 |
18 | 720 |
Key Features
- Versatile Planetary Gear Motor
- Speed Reduction Mechanism
- Exposes shaft of 4 mm in diameter and 10 mm long
- Operating Voltage range from 3V up to 18V
- Overall length of 66.5 mm and maximum diameter of 24 mm
- Connection wires of 20 cm long
- Used motor with a 90-day warranty
- Contains strong magnets and can operate as an electric generator
DC_MOTORS CATALOGUE
Product Specifications:
Operating Voltage: | 3V - 18V |
Condition: | Used |
Warranty: | 90 days |
Exposes Shaft Diameter: | 4 mm |
Exposes Shaft Length: | 10 mm |
Overall Length: | 66.5 mm |
Maximum Diameter: | 24 mm |
Connection Wires Length: | 20 cm |
Similar Products
- 12V 100 RPM Planetary Gear Motor
- 24V 120 RPM Planetary Gear Motor
- 6V 60 RPM Planetary Gear Motor
- 18V 180 RPM Planetary Gear Motor
- 3V 30 RPM Planetary Gear Motor
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for robotics, automotive, and other applications that require a versatile motor with a speed reduction mechanism. The Planetary Gear Motor's ability to operate with a wide range of voltages makes it an ideal choice for many different projects. Its strong magnets and ability to operate as an electric generator make it a useful tool for experimentation and innovation.
DC Motor, Round, Metal Brush
Caution: Do not exceed the maximum voltage rating of 3.0V, as this may cause damage to the motor.
The DC Motor, Round, Metal Brush is a high-quality motor designed for a wide range of applications, including motorized toys, robots, solar devices, model cars, and education. This motor provides smooth operation, low vibration, and low heat, thanks to its metal brush design. It operates within a voltage range of 1.5V - 3.0V, with a nominal voltage of 1.5V. The motor has a current of 0.13A - 0.37A (no load), and a power output of 0.2W. It can achieve speeds of 4200 rpm - 5700 rpm, and has a shaft size of 2mm x 10mm and a diameter of 21mm. The torque at max efficiency is 6.6 g.cm, and the torque at stall is 26 g.cm.
Key Features
- Smooth operation at low voltage and low current
- Metal brush design for low vibration and low heat
- Wide range of applications, including toys, robots, models, and small electromechanical devices
Product Specifications
Operating Voltage Range | 1.5V - 3.0V |
Nominal Voltage | 1.5V |
Current | 0.13A -0.37A (no load) |
Power Output | 0.2W |
Speed | 4200 rpm - 5700 rpm |
Shaft Size | 2mm x 10mm |
Diameter | 21mm |
Torque at Max Efficiency | 6.6 g.cm |
Torque at Stall | 26 g.cm |
Similar Products
- DC Motor, Round, Metal Brush with Gearbox
- DC Motor, Round, Metal Brush with Encoder
- DC Motor, Round, Metal Brush with Shaft Coupling
- DC Motor, Round, Metal Brush with Bracket
- DC Motor, Round, Metal Brush with Mounting Plate
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for toys, robots, models, small electromechanical devices, and education.
DC Motor, Round, Precious Metal Brush 11400
The DC Micro Motor Model RF-300Ca-11400 (0.7 V - 5.0 V) is a low current, medium voltage motor designed for engineering and hobby projects. It has a diameter of 24.3 mm and connection wires that are 150 mm long. This motor is also known as a solar motor because it can operate with low current produced by most solar panels. The main features of the RF-300Ca motors include precious metal brush, 3-slot armature, 3-bar commutator, plastic-insulated sheet rotors, plastic core commutator, stainless steel shaft, class B winding wire, zinc coated steel housing, metal end cap, rubber magnet, oil-impregnated bearing, and built-in varistor. Each motor has two connection wires that are 15 cm long and 5mm stripped and tinned at the ends. The shaft is 2 mm in diameter and 10 mm in length. This DC motor can be used for CD drives, Walkmans, and automobile mirror controllers. It operates with one or two AA batteries, making it a convenient choice for portable projects. The RC300Ca series of motors are also ideal for hobbyists and engineers looking for a reliable and versatile motor.
Key Features:
- Precious metal brush for increased durability
- Low current, medium voltage for engineering and hobby projects
- Can operate with low current produced by most solar panels
- Stainless steel shaft for added strength
- Oil-impregnated bearing for smooth operation
- Operates with one or two AA batteries
Product Specifications:
Product Name | Dc Motor |
Type | Round |
Brush Type | Precious Metal |
Model Number | RF-300CA-11400 |
Voltage | 0.7V - 5.0V |
Current | Low |
Diameter | 24.3mm (max) |
Connection Wires | 150mm long, 5mm stripped and tinned at the ends |
Features | Precious metal brush, 3-slot armature, 3-bar commutator, plastic-insulated sheet rotors, plastic core commutator, stainless steel shaft, Class B winding wire, zinc coated steel housing, metal end cap, rubber magnet, oil-impregnated bearing and built-in varistor |
Similar Products
- Dc Motor, Round, Precious Metal Brush 12000
- Dc Motor, Round, Carbon Brush 11400
- Dc Motor, Flat, Precious Metal Brush 11400
- Dc Micro Motor Model Rf-310Ca-11400 (0.7 V - 5.0 V)
- Dc Motor, Round, Precious Metal Brush 11000
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution:
This motor is intended for engineering and hobby projects and may also be used in some CD drives, walkmans, and automobile mirror controllers. Please use caution when handling and operating the motor. Do not exceed the recommended voltage or current. Keep away from children and pets.Perfect for:
- Engineering students looking for a low current, medium voltage motor for their projects
- Hobbyists interested in building their own motorized devices
- DIY enthusiasts who want to experiment with solar panels
- Professionals in the automotive industry who need a motor for mirror controllers
- Electronics enthusiasts who want to use the motor in CD drives or Walkmans
- Individuals interested in the technical specifications of motors
RF-300CA Round DC Motors
Low voltage, super low current motors with precious metal brush provide smooth operation, low vibration, and low heat. These motors are perfect for CD/DVD drives, audio devices, office automation, motorized toys, robots, models, and small electromechanical devices. The diameter of the motors is 24.3 mm max, and the connection wires are 150 mm long.
Key Features:
- Precious metal brush
- 3-slot armature
- 3-bar commutator
- Plastic-insulated sheet rotors
- Plastic core commutator
- Stainless steel shaft
- Class B winding wire
- Zinc-coated steel housing
- Metal end cap
- Rubber magnet
- Oil-impregnated bearing
- Built-in varistor
These motors are also known as Solar Motors because they can operate with low current produced by most solar panels. The shaft is 2 mm in diameter and 10 mm in length, and each motor has two connection wires, 15 cm long, and 5 mm stripped and tinned at the ends. They operate with one or two AA batteries.
Product Specifications:
Parameter | Value |
Name | RF-300CA Round DC Motors |
Voltage | 2.0-6.0V |
Power | 0.07W |
Diameter | 25mm |
Shaft Diameter | 2mm |
Shaft Length | 10mm |
Connection Wire Length | 150mm |
Maximum Speed | 2700 RPM |
Similar Products:
- RF-370CA-22170 Round DC Motors
- RF-370CA-2465 Round DC Motors
- RF-500TB-14415 Round DC Motors
- RF-500TB-12560 Round DC Motors
- RF-520DC-12550 Round DC Motors
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for: DIY enthusiasts, makers, engineers, and hobbyists.
Air Propelled Model Car Kit
This project is an electric circuit and practical use project. Using air to propel the car eliminates the need for complex components such as gears, chains, belts, and pulleys. The motor and propeller create air currents that push the car forward.
Note: This model has space to accommodate an air compressed bottle, not included.
Key Features
- Air propelled movement
- Electric circuit project
- Includes almost everything needed to complete project
Product Specifications:
Components | Quantity |
Electric motor | 1 |
Plastic propeller | 1 |
Battery holder | 1 |
4 wheels | 1 set |
2 axle rods | 1 set |
Eye screw axle holders | 4 |
Wood board for chassis | 1 |
Wood dowels for motor base | 2 |
Motor strap | 1 |
Similar Products
- Electric Motor Kit
- DIY Circuit Kit
- Wooden Car Model Kit
- Propeller Model Kit
- Air-Powered Boat Kit
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for high school students and technology enthusiasts looking to learn about air propulsion and electrical circuitry in a fun, hands-on way.
Flat Design Motor/Generator
This Flat Design Motor/Generator is ideal for anyone involved in DIY projects or educational fields. It's designed with a compact structure and operates efficiently within a voltage range suitable for small to medium projects. Perfect for creating movement in models, scientific experiments, or even small toy cars.
Key Features
- Compact and efficient design suitable for various applications
- Operates between 1.5 V and 4.5 V
- Maximum efficiency at 4780 rpm with 7.6 g.cm torque
- Can function as both a motor and a generator
- Designed for bulk orders, supporting educational and hobbyist group needs
DC_MOTORS CATALOGUE
Product Specifications
Motor Size | 15 * 20 * 25 MM |
Overall Shaft Length | 38 MM |
Exposed Shaft | 7.5 MM up to 8 MM |
Shaft Diameter | 2.0 MM |
Operating Voltage | DC 1.5 V - 4.5 V |
Rated Voltage | DC 3.0 V |
No Load Speed | 6200 rpm |
Similar Products:
- Small electric DIY motor
- Compact high-speed generator
- Low-voltage student motor
- Miniature project DC motor
- Educational science motor
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for DIY Hobbyists, Student Project Groups, Science Educators, Electronic Enthusiasts, Innovation Workshops
DC Gear Motor
The DC Gear Motor is a low-speed mini electric motor ideal for various applications such as robots, science projects, toys, model cars, automation, controls, and more. This motor operates at a voltage range of 3V-6V and comes with an attached plastic gearbox that reduces the speed to about 100 RPM.
Its compact size and lightweight design make it easy to use with batteries, solar cells, or DC transformers. The motor's body dimensions are 70 x 22 x 18mm and it weighs only 28g, making it a convenient option for a wide range of projects.
Key Features:
- Low-speed DC Gear motor with attached plastic gearbox
- Operating voltage: 3V-6V
- Compact size and lightweight design
- Rated torque: 0.15Nm ~0.60Nm
- Stall torque (6V): 0.8kg.cm
- Continuous no-load current: 150mA /- 10%
Product Specifications:
Parameter | Value |
Rated Voltage | 3~6V |
Continuous No-Load Current | 150mA /- 10% |
Min. Operating Speed (3V) | 90 /- 10% RPM |
Min. Operating Speed (6V) | 200 /- 10% RPM |
Torque | 0.15Nm ~0.60Nm |
Stall Torque (6V) | 0.8kg.cm |
Gear Ratio | 1:48 |
Body Dimensions | 70 x 22 x 18mm |
Recommended Wires | Insulated solid copper 24 AWG with product code PCAWG24 |
Weight | 28g |
DC_MOTORS CATALOGUE
Product Specifications:
- DC Motor with Gearbox 3-6V, 60-100 RPM
- DC Gear Motor with Encoder 6V 25RPM
- Micro DC Gear Motor 3V 6V with 6:1 Gear Ratio
- 12V DC Gear Motor with Gearbox 10RPM
- DC Gear Motor with Encoder 12V 30RPM
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Please read the user manual carefully before use. Be careful while connecting wires and avoid any short circuits.
Perfect for science enthusiasts, hobbyists, students, and anyone looking to build DIY projects such as robots, toys, model cars, automation, controls, and more.
Hobby Motor Generator With Connection Wires
If you're looking for a strong hobby motor that can be used as a generator, the Hobby Motor Generator With Connection Wires is the perfect fit. This motor operates with 1.5 to 3.0 volts and runs at speeds of about 2500 RPM. The dimensions are 40 mm L x 21 mm D and it weighs 22g (0.8 oz).
The wires are connected using terminals and can be unplugged if needed, making it easy to use in a variety of projects. The motor is RE140SA and uses strong magnets to provide extra torque at the expense of some lower speed. With the added benefit of being able to generate semi DC electricity, this hobby motor is a versatile choice for any project.
Key Features:
- Operates with 1.5 to 3.0 volts
- Runs at speeds of about 2500 rpm
- Dimensions are 40 mm L x 21 mm D
- Weight 22g (0.8 oz)
- Wires are connected using terminals and can be unplugged if needed
- Strong magnets provide extra torque at the expense of lower speed
Unique Selling Points:
- Can be used as a generator to create semi DC electricity
- Strong motor for hobby projects
Product Specifications:
Product Name | Hobby Motor Generator With Connection Wires |
Type | Motor, Hobby, Generator, Wires, Connection |
Operating Voltage | 1.5 to 3.0 volts |
Speed | About 2500 rpm |
Dimensions | 40 mm L x 21 mm D |
Weight | 22g (0.8 oz) |
Connectivity | Terminals for wires, can be unplugged if needed |
Model | RE140SA |
Additional Features | Strong magnets for extra torque, can also be used as a generator to create semi-DC electricity |
Similar Products
- Hobby Motor Generator With Lead Wires
- High Torque Hobby Motor With Connection Wires
- Miniature DC Motor With Terminals
- Low Voltage Hobby Generator With Lead Wires
- Small Hobby Motor With High Speeds
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This hobby motor generator with connection wires operates with 1.5 to 3.0 volts and runs at speeds of about 2500 rpm. Use with caution and follow proper safety measures.
Perfect for:
- Hobbyists and enthusiasts who enjoy experimenting with motors and generators
- Students and educators in science and engineering fields
- DIYers who want to create their own small-scale electricity projects
- Individuals who enjoy tinkering with electronics and creating their own gadgets
- Small businesses or startups looking for affordable motor and generator options for their projects
- Anyone interested in learning more about how motors and generators work and how they can be used in various applications
RE140RACLIP DC Motor with Alligator Clip Lead Wires
General Information
The RE140RACLIP DC Motor with Alligator Clip Lead Wires is an ideal educational tool for demonstrations and experiments. Its alligator clip connectors provide an easy and fast connection to the battery holder or DC power supply. The motor is identical to the RE140RA DC motor but comes with alligator clip lead wires already attached.
Key Features
- Easy and fast connection with alligator clip lead wires
- Identical to the RE140RA DC motor
- Operating range of 1.0V - 3.0V
- Nominal voltage of 1.5V
- Speeds of 5000-6000 rpm
- Shaft size of 2mm x 8mm
- Applications in motorized toys, robots, hobbies, model cars, technology education kits, and science experiments
Product Specifications
Operating Range: | 1.0V - 3.0V |
Nominal Voltage: | 1.5V |
Current: | 0.13A - 0.37A |
Power: | 0.21W |
Speed: | 5700 rpm (With standard magnets) or 3500 (with strong magnets) |
Shaft: | 2mm x 8mm |
Lead Wires: | 10" (25 cm) |
Applications: | Motorized toys, Robots, Hobbies, Model Cars, Technology Education kits, Science experiments |
Similar Products
- DC Motor with Alligator Clip Lead Wires
- Electric DC Motor with Alligator Clip Lead Wires
- RE140RA DC Motor with Alligator Clip Lead Wires
- Mini DC Motor with Alligator Clip Lead Wires
- Micro DC Motor with Alligator Clip Lead Wires
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for educational demonstrations and experiments
RE140RAWIRE DC Motor with Lead Wires
Wholesale Only: Minimum order quantity is 10.
The RE140RAWIRE DC Motor with Lead Wires is a high-speed motor designed for a range of applications such as motorized toys, robots, hobbies, model cars, and technology education kits. The motor operates within an operating range of 1.0V - 3.0V with a nominal voltage of 1.5V. It has a current of 0.13A - 0.37A and a power output of 0.21W. With standard magnets, the motor can run at speeds of 5700 rpm, or 3500 rpm with strong magnets. The motor dimensions are 40 mm L x 21 mm D, and it weighs 22g (0.8 oz).
Key Features
- High-speed motor with heat-sealed wires
- Operating range of 1.0V - 3.0V
- Nominal voltage of 1.5V
- Current of 0.13A - 0.37A
- Power output of 0.21W
- Speeds of 5700 rpm with standard magnets, or 3500 rpm with strong magnets
- Dimensions: 40 mm L x 21 mm D
- Weight: 22g (0.8 oz)
Product Specifications
Operating Range | 1.0V - 3.0V |
Nominal Voltage | 1.5V |
Current | 0.13A - 0.37A |
Power | 0.21W |
Speed | 5700 rpm (With standard magnets) or 3500 (with strong magnets) |
Shaft | 2mm x 8mm |
Lead Wires | 10" (25 cm) |
Similar Products
- RE140RA DC Motor
- RE140RA DC Motor with Terminals
- RE140RA DC Motor with Gearbox
- RE140RA DC Motor with Encoder
- RE140RA DC Motor with Wheels
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for motorized toy enthusiasts, robot builders, hobbyists, and educators interested in technology education kits.